A2 Katsausartikkeli tieteellisessä aikausilehdessä
JUNO physics and detector (2022)


JUNO Collaboration. (2022). JUNO physics and detector. Progress in Particle and Nuclear Physics, 123, Article 103927. https://doi.org/10.1016/j.ppnp.2021.103927


JYU-tekijät tai -toimittajat


Julkaisun tiedot

Julkaisun kaikki tekijät tai toimittajatJUNO Collaboration

Lehti tai sarjaProgress in Particle and Nuclear Physics

ISSN0146-6410

eISSN1873-2224

Julkaisuvuosi2022

Volyymi123

Artikkelinumero103927

KustantajaElsevier Ltd.

JulkaisumaaBritannia

Julkaisun kielienglanti

DOIhttps://doi.org/10.1016/j.ppnp.2021.103927

Julkaisun avoin saatavuusEi avoin

Julkaisukanavan avoin saatavuus

Rinnakkaistallenteen verkko-osoite (pre-print)https://arxiv.org/abs/2104.02565


Tiivistelmä

The Jiangmen Underground Neutrino Observatory (JUNO) is a 20 kton liquid scintillator detector in a laboratory at 700-m underground. An excellent energy resolution and a large fiducial volume offer exciting opportunities for addressing many important topics in neutrino and astro-particle physics. With six years of data, the neutrino mass ordering can be determined at a 3-4 sigma significance and the neutrino oscillation parameters sin(2 )theta(12), Delta m(21)(2), and vertical bar Delta m(32)(2)vertical bar can be measured to a precision of 0.6% or better, by detecting reactor antineutrinos from the Taishan and Yangjiang nuclear power plants. With ten years of data, neutrinos from all past core-collapse supernovae could be observed at a 3 sigma significance; a lower limit of the proton lifetime, 8.34 x 10(33) years (90% C.L.), can be set by searching for p -> (nu) over barK(+); detection of solar neutrinos would shed new light on the solar metallicity problem and examine the vacuum-matter transition region. A typical core-collapse supernova at a distance of 10 kpc would lead to similar to 5000 inverse-beta-decay events and similar to 2000 (300) all-flavor neutrino-proton (electron) elastic scattering events in JUNO. Geo-neutrinos can be detected with a rate of similar to 400 events per year. Construction of the detector is very challenging. In this review, we summarize the final design of the JUNO detector and the key R&D achievements, following the Conceptual Design Report in 2015 (Djurcic et al., 2015). All 20-inch PMTS have been procured and tested. The average photon detection efficiency is 28.9% for the 15,000 MCP PMTS and 28.1% for the 5000 dynode PMTS, higher than the JUNO requirement of 27%. Together with the >20 m attenuation length of the liquid scintillator achieved in a 20-ton pilot purification test and the >96% transparency of the acrylic panel, we expect a yield of 1345 photoelectrons per MeV and an effective relative energy resolution of 3.02%/root E(MeV) in simulations (Abusleme et al., 2021). To maintain the high performance, the underwater electronics is designed to have a loss rate <0.5% in six years. With degassing membranes and a micro-bubble system, the radon concentration in the 35 kton water pool could be lowered to <10 mBq/m(3). Acrylic panels of radiopurity <0.5 ppt U/Th for the 35.4-m diameter liquid scintillator vessel are produced with a dedicated production line. The 20 kton liquid scintillator will be purified onsite with Alumina filtration, distillation, water extraction, and gas stripping. Together with other low background handling, singles in the fiducial volume can be controlled to similar to 10 Hz. The JUNO experiment also features a double calorimeter system with 25,600 3-inch PMTS, a liquid scintillator testing facility OSIRIS, and a near detector TAO.


YSO-asiasanathiukkasfysiikkaneutriinottutkimuslaitteetilmaisimet

Vapaat asiasanatJUNO; neutrino physics; neutrino detector


Liittyvät organisaatiot

JYU-yksiköt:


OKM-raportointiKyllä

Raportointivuosi2022

JUFO-taso1


Viimeisin päivitys 2024-30-04 klo 17:36