A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä
Conversion of furfural to 2-methylfuran over CuNi catalysts supported on biobased carbon foams (2021)

Varila, T., Mäkelä, E., Kupila, R., Romar, H., Hu, T., Karinen, R., Puurunen, R. L., & Lassi, U. (2021). Conversion of furfural to 2-methylfuran over CuNi catalysts supported on biobased carbon foams. Catalysis Today, 367, 16-27. https://doi.org/10.1016/j.cattod.2020.10.027

JYU-tekijät tai -toimittajat

Julkaisun tiedot

Julkaisun kaikki tekijät tai toimittajat: Varila, Toni; Mäkelä, Eveliina; Kupila, Riikka; Romar, Henrik; Hu, Tao; Karinen, Reetta; Puurunen, Riikka L.; Lassi, Ulla

Lehti tai sarja: Catalysis Today

ISSN: 0920-5861

eISSN: 1873-4308

Julkaisuvuosi: 2021

Volyymi: 367

Artikkelin sivunumerot: 16-27

Kustantaja: Elsevier

Julkaisumaa: Alankomaat

Julkaisun kieli: englanti

DOI: https://doi.org/10.1016/j.cattod.2020.10.027

Julkaisun avoin saatavuus: Muulla tavalla avoin

Julkaisukanavan avoin saatavuus: 

Julkaisu on rinnakkaistallennettu (JYX): https://jyx.jyu.fi/handle/123456789/75035

Tiivistelmä

In this study, carbon foams prepared from the by-products of the Finnish forest industry, such as tannic acid and pine bark extracts, were examined as supports for 5/5% Cu/Ni catalysts in the hydrotreatment of furfural to 2-methylfuran (MF). Experiments were conducted in a batch reactor at 503 K and 40 bar H2. Prior to metal impregnation, the carbon foam from tannic acid was activated with steam (S1), and the carbon foam from pine bark extracts was activated with ZnCl2 (S2) and washed with acids (HNO3 or H2SO4). For comparison, a spruce-based activated carbon (AC) catalyst and two commercial AC catalysts as references were investigated. Compressive strength of the foam S2 was 30 times greater than that of S1. The highest MF selectivity of the foam-supported catalysts was 48 % (S2, washed with HNO3) at a conversion of 91 %. According to the results, carbon foams prepared from pine bark extracts can be applied as catalyst supports.

YSO-asiasanat: katalyysi; katalyytit; kupari; nikkeli; vaahdot; biohiili; sivutuotteet

Vapaat asiasanat: biobased foams; carbon; mechanical strength; furfural; Cu/Ni catalyst; 2-methylfuran

Liittyvät organisaatiot

Hankkeet, joissa julkaisu on tehty

OKM-raportointi: Kyllä

VIRTA-lähetysvuosi: 2021

JUFO-taso: 1