Go to Header
Go to Main Navigation
Go to Content
Go to Footer
Ohjeet
Kirjaudu sisään (ulkop. käyttäjät)
Kirjaudu sisään (JY-tunnus)
Saavutettavuus
English (GB)
Henkilöluettelo
>
Harry Whitlow
Etusivu
Asiantuntijat
Organisaatiot
Hankkeet
Julkaisut
Tutkimusaineistot
Tieteenalat
Rahoitusohjelmat
Seurantakohteet
YSO-asiasanat
Harry
Whitlow
Ei aktiivista nimitystä
Julkaisut ja muut tuotokset
1/6
Diffusion studies with radioactive ions
(
2014
)
Whitlow, Harry; et al.
;
A2
Advanced time-stamped total data acquisition control front-end for MeV ion beam microscopy and proton beam writing
(
2013
)
Kivistö, Henri; et al.
;
A1
Angular spreading measurements using MeV ion microscopes
(
2013
)
Whitlow, Harry; et al.
;
A1
Development of procedures for programmable proximity aperture lithography
(
2013
)
Whitlow, Harry; et al.
;
A1
Energy-loss straggling of 2–10 MeV/u Kr ions in gases
(
2013
)
Vockenhuber, Christof; et al.
;
A1
;
OA
Fast and blister-free irradiation conditions for cross-linking of PMMA induced by 2 MeV protons
(
2013
)
Unai, Somrit; et al.
;
A1
High speed microfluidic prototyping by programmable proximity aperture MeV ion beam lithography.
(
2013
)
Puttaraksa, Nitipon; et al.
;
A1
Influence of titanium-substrate roughness on Ca-P-O thin films grown by atomic layer deposition
(
2013
)
Sagari A.R. , Ananda; et al.
;
A1
Ion-induced fluorescence imaging of endosomes
(
2013
)
Norarat, Rattanaporn; et al.
;
A4
Lithographic fabrication of soda-lime glass based microfluidics
(
2013
)
Rojas, Laura; et al.
;
A1
Objective improvement of the visual quality of ion microscope images
(
2013
)
Norarat, Rattanaporn; et al.
;
A1
Why are hydrogen ions best for MeV ion beam lithography?
(
2013
)
Norarat, Rattanaporn; et al.
;
A1
Development of the Jyväskylä microbeam facility
(
2012
)
Norarat, Rattanaporn; et al.
;
A1
Fabrication of a negative PMMA master mold for soft-lithography by MeV ion beam lithography
(
2012
)
Puttaraksa, Nitipon; et al.
;
A1
Industrial Aspects of Ion Beam Analysis
(
2012
)
Hellborg, R.; et al.
;
A3
Viimeisin päivitys 2024-17-04 klo 21:21